Equipment is Our Product, Service is Our Business

Takeuchi TL6R (radial lift) compact track loader for sale at Luby Equipment Services.

TL6R Compact Track Loader

The TL6R features a radial lift loader design and meets all current emission standards. With a height of 6 ft 5.8 in and a width of just over 5 ft the dimensions of the TL6R allow it to excel on job sites that may have height and width restrictions. This track loader comes with a newly designed cabin with an overhead 5.7” color multi-informational display and backlit rocker switches that control a variety of machine functions. The TL6R comes standard with a quiet track design with flotation pads that reduces vibration, noise levels, and improves ride quality.

Models: TL8R2, TL10V2, TL12R2, TL12V2, Excavators, Wheel Loaders

TL6R FEATURES

ENGINE
  • U.S. EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • DOC+DPF Exhaust After Treatment
  • Active Power Control Power Management System
  • Working Modes – Power and ECO
  • Automatic Fuel Bleed System
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
  • Dual Element Air Filter
ELECTRICAL
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • Work Lights, Front and Rear
  • Engine Preheat
  • Hour Meter
  • Back-up Alarm
  • Horn
UNDERCARRIAGE AND FRAME
  • Permanently Sealed Track Rollers with Metal Face Seals
  • Double and Triple Flange Track Rollers
  • Fully Welded Frame with Integrated Cross Members
  • Front and Rear Tie-Down and Lift Points
  • Integrated Rear Bumper
  • 2 Speed Travel
  • 12.6″ Quiet Ride Track Design
OPERATOR’S STATION
  • 5.7″ Color Multi-Informational Display with Rear View Camera
  • Tilt-up Operator’s Station
  • Deluxe Adjustable Suspension Seat
  • Rear Pivoting Seat Bar with Integrated Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2″ Seat Belt
  • Retractable 3″ Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Pressurized Cab with Swing Out Door, A/C, Heat, Defrost and Front Wiper (optional)
  • AM/FM/MP3 Radio with NOAA Weatherband (optional)
HYDRAULIC & WORKING EQUIPMENT
  • Cushioned Boom Cylinders
  • Boom Float with Detent
  • Hydraulic Pilot Controls
  • Proportional Auxiliary Controls with Detent
  • Pressure Relieving 1/2″ Flat Faced Coupler Body
  • 14-Pin Connector
  • Hydraulic Self Leveling
  • Mechanical Quick Coupler (Canopy)
  • Hydraulic Quick Coupler – Cab – Standard Equipment
  • Hydraulic Quick Coupler – Canopy – optional
  • Primary Flow Auxiliary Hydraulics 18.4 gpm

SPECIFICATIONS AND DIMENSIONS

TL6R SPECS

OPERATING PERFORMANCE
Operating Weight – Canopy7,485 lb
Operating Weight – Cab7,780 lb
Tipping Load5,269 lb
Rated Operating Capacity, SAE J818*1,841 lb
Operating Load at 50% of Tipping Load2,635 lb
Bucket Breakout Force5,930 lb
Lift Arm Breakout Force4,860 lb
Traction Force8,655 lb
Ground Pressure – 12.6″ Track5.1 psi
Travel Speed – Low4.3 mph
Travel Speed – High6.2 mph
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load.
HYDRAULIC SYSTEM
Auxiliary Flow – Primary Circuit17.8 gpm
Hydraulic System Pressure2,988 psi
ENGINE
Make / ModelKubota / V2403-CR-TE4B
Engine Displacement148.5 cu in
Horsepower @ 2,700 rpm65.2 hp
Maximum Torque @ 1,500 rpm144.3 ft-lb
FLUID CAPACITIES
Engine Lubrication7.6 qt
Cooling System14.0 qt
Fuel Tank Capacity20.0 gal
Fuel Consumption (65% of Full Load)2.69 gal/hr
Hydraulic Reservoir Capacity7.9 gal
Hydraulic System Capacity13.5 gal

TL6R DIMENSIONS

MACHINE DIMENSIONS
Max. Lift Height to Bucket Pin9 ft 6.4 in(2,905 mm)
Dump Height Fully Raised7 ft 5.6 in(2,275 mm)
Dump Reach Fully Raised1 ft 10.0 in(560 mm)
Dump Angle38°
Rollback Angle31°
Track Ground Contact Length4 ft 6.9 in(1,395 mm)
Machine Length8 ft 9.9 in(2,689 mm)
Transport Length10 ft 11.1 in(3,330 mm)
Transport Height6 ft 5.8 in(1,975 mm)
Departure Angle30°
Clearance Circle with Bucket6 ft 10.5 in(2,095 mm)
Clearance Circle without Bucket4 ft 6.9 in(1,395 mm)
Clearance Circle Rear4 ft 11.8 in(1,520 mm)
Track Width12.6 in(320 mm)
Ground Clearance9.1 in(230 mm)
Overall Width without Bucket5 ft 0.2 in(1,530 mm)

TAKEUCHI FLEET MANAGEMENT

  • 2 Year Standard Service
  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Costs
  • Geofencing

CONTACT US

    Thank you for your interest. Please complete the form below and one of our sales specialists will get back to you as soon as possible.









    © Luby Equipment. All Rights Reserved.
    Created by Winsby Inc.


      Crawler Dozers


      Model Net HP Operating Weight Pad Width Blade Width Day Week 4 Weeks
      650M 68 HP 15,803 lb 24" 90" $400 $1,330 $3,600
      750M 92 HP 20,040 lb 28" 96" $500 $1,650 $4,500
      850M 112 HP 21,980 lb 28" 104" $600 $2,000 $5,400
      1150M 127 HP 31,134 lb 30" 120" $725 $2,175 $6,525
      1650M 150 HP 37,756 lb 34" 130" $825 $2,675 $7,425
      2050M 214 HP 45,414 lb 36" 135" $1,100 $3,650 $9,900

      Extra long track, wide track, and low ground pressure models available.

      Skid Steer Loaders

      Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
      SR130 49 HP 5,070 lb 1,300 lb 66" - 84" $185 $550 $1,650
      SR160 60 HP 5,510 lb 1,600 lb 66" - 84" $185 $550 $1,650
      SR175 67 HP 6,270 lb 1,750 lb 66" - 84" $185 $550 $1,650
      SR175 HF 67 HP 6,270 lb 1,750 lb 66" - 84" $200 $600 $1,800
      SV185 60 HP 6,570 lb 1,850 lb 66" - 84" $215 $725 $1,950
      SV185 HF 60 HP 6,570 lb 1,850 lb 66" - 84" $225 $675 $2,025
      SR210 74 HP 6,970 lb 2,100 lb 66" - 84" $275 $970 $2,475
      SR210 HF 74 HP 6,970 lb 2,100 lb 66" - 84" $300 $1,050 $2,700
      SR240 74 HP 7,400 lb 2,400 lb 66" - 84" $285 $1,000 $2,495
      SR240 HF 74 HP 7,400 lb 2,400 lb 66" - 84" $310 $1,125 $2,775
      SR270 90 HP 8,117 lb 2,700 lb 70" - 84" $295 $1,050 $2,495
      SR270 HF 90 HP 8,117 lb 2,700 lb 70" - 84" $325 $1,150 $2,760
      SV280 74 HP 8,090 lb 2,800 lb 70" - 84" $295 $1,050 $2,495
      SV280 HF 74 HP 8,090 lb 2,800 lb 70" - 84" $325 $1,150 $2,775
      SV340 90 HP 9,100 lb 3,400 lb 70" - 84" $310 $1,050 $2,525
      SV340 HF 90 HP 9,100 lb 3,400 lb 70" - 84" $335 $1,150 $2,795

      SR = Radial Lift, SV = Vertical Lift, HF = High Flow • Machines equipped with smooth or tooth bucket • See page 7 for attachments

      Compact Excavators

      Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
      CX17C 16.8 HP 3,910 lb 7' 3" $200 $580 $1,685
      CX26C 24.8 HP 5,520 lb 7' 11" $220 $605 $1,750
      CX30C 24.8 HP 6,020 lb 8' 2" $225 $650 $1,895
      CX33C 24.4 HP 7,110 lb 9' 11" $235 $685 $1,975
      CX37C 24.4 HP 7,990 lb 10' 3" $250 $750 $2,250
      CX57C 66.9 HP 12,050 lb 12' 6" $270 $785 $2,275
      CX60C 64.7 HP 12,940 lb 11' 9" $280 $815 $2,355
      CX75C SR 55.2 HP 16,200 lb 13' 7" $375 $1,150 $3,495
      CX80C 55.2 HP 18,800 lb 13' 9" $400 $1,200 $3,600
      Model Net HP Operating Weight Max Dig Depth Day Week 4 weeks
      TB210R 11.7 HP 2,535 lb 5' 9” $200 $710 $1,800
      TB216 15 HP 3,902 lb 7' 10” $220 $725 $1,915
      TB230 24.4 HP 6,360 lb 9' 3” $225 $650 $1,895
      TB235-2 29.8 HP 7,650 lb 11' 2” $245 $700 $2,060
      TB240 35.8 HP 8,570 lb 11' 4” $260 $775 $2,250
      TB250-2 39 HP 11,288 lb 12' 5” $270 $795 $2,300
      TB260 47.6 HP 12,645 lb 12' 9” $280 $815 $2,355
      TB290 69.2 HP 18,630 lb 15' $400 $1,200 $3,600

      Zero tail swing

      TB280FR 69.2 HP 18,810 lb 14' 11” $400 $1,200 $5,600

      Tracked Excavators


      Model Net HP Operating Weight Max Dig Depth Day Week 4 Weeks
      CX130D 102 HP 29,131 lb 18' 3" $585 $1,705 $4,945
      CX145D SR 102 HP 52,100 lb 18' 1” $605 $1,750 $5,075
      CX160D 112 HP 38,400 lb 19' 11" $615 $1,775 $5,155
      CX210D 160 HP 48,859 lb 20' 1" $675 $1,975 $5,695
      CX210D LR 160 HP 48,973 lb 39' 4" $1,425 $4,150 $12,000
      CX245D SR 160 HP 56,900 lb 20' 1" $725 $2,100 $6,095
      CX250D 177 HP 56,909 lb 22' 8" $750 $2,185 $6,350
      CX250D LR 177 HP 63,523 lb 47' 9" $1,625 $4,700 $13,625
      CX300D 207 HP 67,271 lb 22' 9" $1,025 $2,965 $8,595
      CX300D LR 207 HP 67,271 lb 24' 5" $1,835 $5,325 $15,450
      CX350D 268 HP 82,485 lb 24’ 1" $1,150 $3,350 $9,725
      CX490D 362 HP 109,300 lb 25’ 4" $1,625 $4,700 $13,650

      SR = Short Radius, RT = Rubber Track, LR = Long Reach • Additional bucket rental add 15% of rate Available with hydraulic couplers or thumbs add 15%

      Compact Wheel Loaders


      Model Net HP Operating weight Max Heaped Bucket Capacity Day Week 4 weeks
      21F 58 HP 11,272 lb 0.92 yd³ $300 $900 $2,700
      21F XT 58 HP 10,979 lb 0.92 yd³ $300 $900 $2,700
      121F 64 HP 11,618 lb 1.05 yd³ $300 $900 $2,700
      121F XT 64 HP 11,067 lb 1.05 yd³ $300 $900 $2,700
      221F 74 HP 12,547 lb 1.2 yd³ $350 $1,050 $3,150
      221F HS 74 HP 12,547 lb 1.2 yd³ $350 $1,050 $3,150
      321F 74 HP 13,303 lb 1.3 yd³ $350 $1,050 $3,150
      321F HS 74 HP 13,303 lb 1.3 yd³ $350 $1,050 $3,150

      XT = Tool Carrier, HS = High Speed

      Wheel Loaders

      Model Net HP Operating Weight Max Heaped Bucket Capacity Day Week 4 Weeks
      521G 142 HP 24,035 lb 2.3 yd³ $495 $1,435 $4,165
      521G XT 142 HP 25,384 lb 2.3 yd³ $495 $1,435 $4,165
      521G XR 142 HP 24,572 lb 2.3 yd³ $495 $1,435 $4,165
      621G 162 HP 27,695 lb 2.7 yd³ $540 $1,565 $4,540
      621G XT 162 HP 29,076 lb 2.7 yd³ $540 $1,565 $4,540
      621G XR 162 HP 28,483 lb 2.7 yd³ $540 $1,565 $4,540
      721G 195 HP 32,492 lb 3.50 yd³ $615 $1,785 $5,175
      721G XT 195 HP 33,392 lb 3.50 yd³ $615 $1,785 $5,175
      721G XR 195 HP 32,851 lb 3.50 yd³ $615 $1,785 $5,175
      821G 230 HP 40,057 lb 4.25 yd³ $690 $2,000 $5,800
      821G XR 230 HP 40,648 lb 4.25 yd³ $690 $2,000 $5,800
      921G 255 HP 45,071 lb 4.75 yd³ $980 $2,850 $8,250
      921G XR 255 HP 45,651 lb 4.75 yd³ $980 $2,850 $8,250
      1021G 320 HP 55,282 lb 5.50 yd³ $1,240 $3,500 $10,450
      1021G XR 320 HP 58,711 lb 5.50 yd³ $1,240 $3,500 $10,450
      1121G 347 HP 61,650 lb 6.25 yd³ $1,500 $4,325 $12,550
      1121G XR 347 HP 63,443 lb 6.25 yd³ $1,500 $4,325 $12,550
      Fork Attachment $50 $150 $450

      XT = Tool Carrier, XR= Extended Reach • Quick couplers available, add 15%

      Rough Terrain Forklifts

      Model Type Operating Weight Capacity Reach Day Week 4 Weeks
      586H Standard 13,682 lb 6,000 lb 15' $275 $800 $2,350
      588H Standard 16,102 lb 8,000 lb 15' $300 $900 $2,700

      Breakers

      Model Carry Weight Minimum Carry Weight Maximum Flow Supply Day Week 4 Weeks
      HP500 3,750 lb 14,300 lb 8 - 16 g/m $205 $680 $1,850
      HP750 6,650 lb 17,600 lb 14 - 22 g/m $220 $730 $1,980
      HP1000 7,750 lb 23,100 lb 14 - 24 g/m $350 $1,050 $3,150
      HP1100 8,850 lb 26,450 lb 16 - 27 g/m $350 $1,050 $3,150
      HP1250 11,050 lb 30,850 lb 19 - 28 g/m $390 $1,170 $3,500
      HP1500 14,400 lb 35,200 lb 19 - 29 g/m $450 $1,375 $4,150
      HP2000 26,500 lb 48,500 lb 23 - 25 g/m $550 $1,670 $4,500
      HP3000 33,000 lb 55,000 lb 30 - 40 g/m $750 $2,250 $6,800
      HP4000 35,500 lb 61,500 lb 34 - 43 g/m $835 $2,670 $7,900
      HP5000 42,000 lb 70,500 lb 39 - 48 g/m $950 $2,850 $8,600
      HP5500 46,500 lb 83,500 lb 43 - 53 g/m $1,025 $3,065 $9,200
      HP7500 51,000 lb 92,000 lb 48 - 61 g/m $1,200 $3,600 $10,800
      HP8000 60,000 lb 110,000 lb 51 - 71 g/m $1,200 $3,600 $10,800

      Attachments for SSLs & CTLs


      Loader Attachments Standard Flow

      Description Day Week 4 Weeks
      Breaker 500 ft lb $205 $680 $1,845
      Breaker 750 ft 1b $250 $750 $1,900
      Brush Hog 72" - 80" $250 $875 $2,250
      Bucket - Extra $50 $150 $450
      Dozer Blade 80" or 96" $150 $525 $1,350
      Drop Hammer Cyclone 3,500 lb $275 $963 $2,475
      Grapple Root 72" - 82" $90 $315 $810
      Pallet Fork $50 $150 $450
      PWR Power Rake $250 $825 $2,250
      Scrap Grapple 72" - 78" $90 $315 $810
      Soil Conditioner/Preparator $150 $525 $1,350
      Trencher - 6" or 8" W x 48" D $170 $570 $1,550
      Tree Puller $75 $250 $725

      Loader Attachments High Flow

      Cold Planer - 24" Drum $450 $1,500 $4,050
      Cold Planer - 40" Drum $560 $1,870 $5,040

      Augers

      Auger Drives with Bit up to 24" $100 $300 $900
      Auger Extra Bits up to 24" $50 $175 $450
      Auger Extra Bits 30" to 36" $75 $265 $675
      Auger Extension Range - 8" to 36" $20 $60 $180

      Brooms

      Broom, Angle 84" $225 $700 $2,025
      Broom, Pickup 72" $225 $700 $2,025

      Single Drum Rollers

      Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
      SV208D 99 HP 15,830 lb 66” $515 $1,495 $4,325
      SV210D 99 HP 19,538 lb 66” $540 $1,550 $4,550
      SV212D 154 HP 24,520 lb 84” $550 $1,595 $4,650
      SV216D 154 HP 31,640 lb 84” $575 $1,675 $4,850

      Available with dozer blade add 10% • Shell kits available add 20%

      Double Drum Vibratory Rollers


      Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
      DV209D 100 HP 21,080 lb 71” $505 $1,465 $4,250
      DV210D 100 HP 22,930 lb 71" $535 $1,550 $4,500

      Trench Roller

      Model Rated HP Operating Weight Capacity Drum Width Day Week 4 Weeks
      RTLx-SC3 16 HP 3,020 lb 2,400 lb 32.0" $225 $675 $2,200

      Mud Buggies

      Model Weight Volume Load Capacity Day Week 4 Weeks
      MB 1600 Tire 1,370 lb 16 ft³ 2,500 lb $75 $275 $725
      MBTX 2500 Track 1,640 lb 16 ft³ 2,500 lb $150 $525 $1,375

      Machine Control Systems

      Model Day Week 4 Weeks
      LMR240 $50 $75 $200
      LMR360 $100 $125 $375
      DM200 $100 $125 $375
      CoPiIot $150 $300 $500
      iCON Grade iGD2, 2D system $575 $1,450 $3,300
      iCON Grade iGD3, 3D system $625 $1,600 $3,600
      Base Station & Rover Jobsite Setup $750 $2,000 $4,000

      (one month minimum)

      Lasers


      104" Model Distance Day Week 4 Weeks
      Rugby Beam Laser 3,000' $80 $200 $600
      Rugby Grade Laser 2,500' $50 $150 $450

      Loader Backhoes

      Model Net HP Operating Weight Max Dig Depth Day Week 4 Weeks
      580EP 74 HP 15,795 lb 18'6" $300 $825 $2,275
      580N 90 HP 16,589 lb 18'3" $325 $895 $2,450
      580SN 97 HP 17,269 lb 17'11" $345 $950 $2,600
      580SN WT 97 HP 20,077 lb 18' $365 $1,000 $2,760
      590SN 110 HP 20,532 lb 19'6" $380 $1,045 $2,875

      All units equipped with cab heater and A/C, X-hoe, 4 wheel drive, ride control, manual quick coupler, and auxiliary hydraulics


      Backhoe attachments

      Model Day Week 4 Weeks
      Additional Bucket Rental $50 $150 $450
      Auger and Bit $100 $300 $900
      Auger Extension $20 $60 $180
      Additional Auger Bit $50 $150 $450
      HP1100 Breaker $350 $1,050 $3,150
      HP1250 Breaker $390 $1,170 $3,500
      HP1500 Breaker $450 $1,350 $4,050
      Hydraulic Thumb $200 $600 $1,800

      Compact track loaders

      Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
      TR270 74 HP 8,270 lb 2,700 lb 66" $275 $800 $2,300
      TR270 HF 74 HP 8,270 lb 2,700 lb 66" $315 $875 $2,525
      TR310 74 HP 8,880 lb 3,100 lb 72" $285 $825 $2,315
      TR310 HF 74 HP 8,880 lb 3,100 lb 72" $315 $915 $2,550
      TR340 90 HP 10,000 lb 3,400 lb 78" $320 $945 $2,825
      TR340 HF 90 HP 10,000 lb 3,400 lb 78" $345 $1,025 $3,050
      TV370 74 HP 9,630 lb 3,700 lb 78" $330 $975 $2,750
      TV370 HF 74 HP 9,630 lb 3,700 lb 78" $350 $1,015 $2,850
      TV380 90 HP 10,550 lb 3,800 lb 78" $360 $1,075 $2,875
      TV380 HF 90 HP 10,550 lb 3,800 lb 78" $375 $1,150 $2,900
      TV450 90 HP 10,610 lb 4,500 lb 78" $385 $1,200 $2,950
      TV450 HF 90 HP 10,610 lb 4,500 lb 78" $410 $1,275 $3,175
      TV620B 114 HP 16,000 lb 6,200 lb 84" $600 $1845 $4625

      TR = Radial Lift, TV = Vertical Lift, HF = High Flow • Machines equipped with smooth or tooth bucket

      Model Net HP Operating Weight Rated Operating Capacity* Available Bucket Widths Day Week 4 Weeks
      TL6 65 HP 7,780 lb 2,635 lb 60" - 80" $265 $795 $2,200
      TL8 74 HP 8,631 lb 3,010 lb 60" - 80" $285 $825 $2,315
      TL8 HF 74 HP 8,631 lb 3,010 lb 60" - 80" $315 $915 $2,550
      TL10V2 74 HP 10,270 lb 3,600 lb 70" - 90" $325 $950 $2,650
      TL10V2 HF 74 HP 10,270 lb 3,600 lb 70" - 90" $350 $1,015 $2,850
      TL12R2/V2 111 HP 12,590 lb 4,315 lb 76" - 90" $385 $1,200 $2,950
      TL12R2/V2 HF 111 HP 12,590 lb 4,315 lb 76" - 90" $410 $1,275 $3,175
      TB2150CL 114 HP 34,480 lb   18 ft $635 $1835 $5325

      HF = High Flow • Machines equipped with smooth or tooth bucket

      Small Double Drum Roller

      Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
      DV23 35.5 HP 5,270 lb 39.4" $225 $650 $1,895
      DV26 31 HP 5,842 lb 47.2” $285 $825 $2,395
      DV36 43.5 HP 8,290 lb 51.2” $320 $925 $2,695
      DV45 40 HP 10,296 lb 54.3" $450 $1,305 $3,785
      Model Rated HP Operating Weight Drum Width Day Week 4 Weeks
      RD12A 16.6 HP 2,490 lb 35.4" $204 $595 $1,725

      Mulchers

      Model Overall Width Weight Flow Range Day Week 4 Weeks
      BH74SS 5 ft 1 in 2,626 lb 24 - 45 gpm $500 $1,700 $4,500

      Midi Excavator

      Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
      CX75C SR 55.2 HP 16,200 lb 13' 7" $375 $1,150 $3,495
      CX80C 55.2 HP 18,800 lb 13' 9" $400 $1,200 $3,600
      Model Operating Net HP Weight Max Dig Depth Day Week 4 weeks
      TB280FR 69.2 HP 18,810 lb 14' 11” $400 $1,200 $3,600
      TB290 69.2 HP 18,630 lb 15' $400 $1,200 $3,600
      TB2150 114 HP 34,480 lb 18"

        Request a Quote

        [anr_nocaptcha g-recaptcha-response]