Equipment is Our Product, Service is Our Business

TL10V2

Featured Packages

Cardinal Package

  • Cab
  • Ride Control (CRR)
Standard Equipment
ENGINE
  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • High Pressure Common Rail Injection System
  • DOC+DPF Exhaust After Treatment
  • Automatic Fuel Bleed System
  • Active Power Control Power Management System
  • Working Modes – Standard and ECO
  • Dual Element Air Filter
  • Dial and Foot Throttle
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
  • Back-up Alarm
  • Horn
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional) 
  • Retractable 3″ Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Polycarbonate Door and Level 2 Guard (High Flow Only)
  • Primary Flow Auxiliary Hydraulics 18.8 gpm
  • High Flow Auxiliary Hydraulics 32.8 gpm (optional)
  • Secondary Auxiliary Hydraulics 18.8 gpm (optional)
  • Ride Control (optional)
  • Pattern Change Valve (ISO or H) (optional)
ELECTRICAL
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • LED Work Lights: Two Front and Two Rear
  • Engine Preheat
  • Hour Meter
HYDRAULIC & WORKING EQUIPMENT
  • Vertical Lift Design
  • Pilot Hydraulic Controls
  • Boom Float with Detent
  • Cushioned Boom Cylinders
  • Hydraulic Self Leveling
  • Proportional Auxiliary Hydraulic Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • High Capacity Steel Hydraulic Tank
  • Mechanical Quick Coupler
  • Hydraulic Quick Coupler Cab – Standard Equipment
  • Hydraulic Quick Coupler Canopy – optional
UNDERCARRIAGE AND FRAME
  • Double Reduction Planetary Drives
  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Two Speed Travel
  • 15.7″ Rubber Track
  • Grease Type Track Adjuster
  • Front and Rear Tie-Down Points and Lift Points
  • Rear Bumper Integrated into Frame
OPERATOR’S STATION
  • 5.7″ Color Multi-Informational Display with Rear Camera
  • Tilt-up Operator’s Station
  • Deluxe High Back Suspension Seat
  • Rear Pivoting Lap Bar with Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2″ Seat Belt
Specifications
OPERATING PERFORMANCE
  • Operating Weight – Canopy 9,950 lb (4,515 kg)
  • Operating Weight – Cab 10,270 lb (4,660 kg)
  • Tipping Load 7,205 lb (3,268 kg)
  • Rated Operating Capacity (ISO 14397-1)@35%* 2,522 lb (1,144 kg)
  • Operating Load at 50% of Tipping Load 3,600 lb (1,633 kg)
  • Bucket Breakout Force 6,520 lb (2,957 kg)
  • Lift Arm Breakout Force 5,400 lb (2,450 kg)
  • Traction Force 9,730 lb (4,413 kg)
  • Ground Pressure – Canopy 4.9 psi (34.3 kPa)
  • Ground Pressure – Cab 5.1 psi (35.4 kPa)
  • Travel Speed – Low 4.8 mph (7.7 km/hr)
  • Travel Speed – High 7.0 mph (11.3 km/hr)
HYDRAULIC SYSTEM
  • Auxiliary Flow – Primary Circuit 18.8 gpm (71.2 Lpm)
  • Auxiliary Flow – High Flow (optional) 32.8 gpm (124.0 Lpm)
  • Hydraulic System Pressure 3,481 psi (21.0 MPa)
FLUID CAPACITIES
  • Engine Lubrication 11.8 qt (11.2 L)
  • Cooling System 15.9 qt (15.0 L)
  • Fuel Tank Capacity 21.5 gal (81.0 L)
  • Fuel Consumption (65% of Full Load) 2.7 gal/hr (10.3 L /hr)
  • Hydraulic Reservoir Capacity 9.5 gal (36.0 L)
  • Hydraulic System Capacity 17.2 gal (65.0 L)
ENGINE
  • Make / Model Kubota / V3307CR-TE4B
  • Engine Displacement 203 cu in (3.3 L)
  • Horsepower @ 2,600 rpm 74.3 hp (55.4 kW)
  • Maximum Torque @ 1,500 rpm 195 ft-lb (265.0 Nm)
MACHINE DIMENSIONS
  • Max. Lift Height to Bucket Pin 10 ft 4.8 in (3,169 mm)
  • Dump Height Fully Raised 7 ft 11.9 in (2,435 mm)
  • Dump Reach Fully Raised 3 ft 1.4 in (950 mm)
  • Dump Angle 40°
  • Rollback Angle 30°
  • Track Ground Contact Length 4 ft 7.9 in (1,419 mm)
  • Machine Length 9 ft 7.2 in (2,925 mm)
  • Transport Length 12 ft 1.0 in (3,680 mm)
  • Transport Height 7 ft 5.4 in (2,270 mm)
  • Departure Angle 30°
  • Clearance Circle with Bucket 7 ft 8.5 in (2,350 mm)
  • Clearance Circle without Bucket 5 ft 0 in (1,535 mm)
  • Clearance Circle Rear 5 ft 5.2 in (1,655 mm)
  • Track Width 15.7 in (400 mm)
  • Ground Clearance 12.6 in (320 mm)
  • Overall Width without Bucket 5 ft 8.5 in (1,740 mm)
Takeuchi Fleet Management
  • 2 Year Standard Service
  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Costs

Request a Quote