Equipment is Our Product, Service is Our Business

TL8CRW (Wide Track)

Featured Packages

Cardinal Package

  • Cab
  • Ride Control (CRR)
Standard Equipment
ENGINE
  • EPA Final Tier 4 Emission Compliant
  • Turbocharged
  • DOC+DPF Exhaust After Treatment
  • Active Power Control Power Management System
  • Working Modes – Power and ECO
  • Automatic Fuel Bleed System
  • High Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
  • Dual Element Air Filter, with Pre-Cleaner
  • Engine Preheat
  • Hour Meter
  • Back-up Alarm
  • Horn
  • Retractable 3″ Seat Belt (optional)
  • 3 Point Retractable Seat Belt (optional)
  • Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper (optional)
  • AM/FM/MP3 Radio with NOAA Weatherband (optional)
  • Polycarbonate Door (High Flow Only)
  • High Flow Auxiliary Hydraulics 33 gpm (optional Cab Only)
  • Pattern Change Valve (ISO or H) (optional)
ELECTRICAL
  • Multi-Informational Display
  • Sealed Rocker Switches
  • 12 volt System with 60 amp Alternator
  • Halogen Work Lights, Front and Rear
HYDRAULIC & WORKING EQUIPMENT
  • Cushioned Boom Cylinders
  • Boom Float with Detent
  • Hydraulic Pilot Controls
  • Proportional Auxiliary Controls with Detent
  • Pressure Relieving Flat Faced Coupler Body
  • 14-Pin Connector with Push Button Control
  • Hydraulic Self Leveling
  • Mechanical Quick Coupler
  • Hydraulic Quick Coupler – Cab – Standard Equipment
  • Hydraulic Quick Coupler – Canopy – optional
  • Primary Flow Auxiliary Hydraulics 18.4 gpm
UNDERCARRIAGE AND FRAME
  • Permanently Sealed Track Rollers with Metal Face Seals
  • Fully Welded Frame with Integrated Cross Members
  • Front and Rear Tie-Down and Lift Points
  • 2 Speed Travel
  • 15.7″ Rubber Track with Integrated Steel Cables and Forged Steel Inserts
  • 12.6″ Rubber Track with Integrated Steel Cables and Forged Steel Inserts (optional)
OPERATOR’S STATION
  • Tilt-up Operator’s Station
  • Deluxe High Back Adjustable Suspension Seat
  • Rear Pivoting Seat Bar with Integrated Arm Rest
  • ROPS / FOPS Structure
  • Retractable 2″ Seat Belt
Specifications
OPERATING PERFORMANCE
  • Operating Weight – Canopy 8,455 lb (3,835 kg)
  • Operating Weight – Cab 8,631 lb (3,915 kg)
  • Tipping Load 6,020 lb (2,731 kg)
  • Rated Operating Capacity, SAE J818* 2,105 lb (955 kg)
  • ROC w/ Optional Counter Weight 2,323 lb (1,054 kg)
  • Operating Load at 50% of Tipping Load 3,010 lb (1,365 kg)
  • Bucket Breakout Force 6,856 lb (3,110 kg)
  • Lift Arm Breakout Force 6,709 lb (3,100 kg)
  • Traction Force 9,127 lb (4,140 kg)
  • Ground Pressure – 15.7″ Track 4.4 psi (30.2 kPa)
  • Ground Pressure – 12.6″ Track 5.4 psi (37.2 kPa)
  • Travel Speed – Low 4.6 mph (7.4 km/hr)
  • Travel Speed – High 6.8 mph (11.0 km/hr)
ENGINE
  • Make / Model Kubota / V3307-CR-Turbo
  • Engine Displacement 203 cu in (3.3 L)
  • Horsepower @ 2,600 rpm 74.3 hp (55.4 kW)
  • Maximum Torque @ 1,500 rpm 192 ft-lb (260 Nm)
HYDRAULIC SYSTEM
  • Auxiliary Flow – Primary Circuit 18.4 gpm (69.5 Lpm)
  • Auxiliary Flow – High Flow (optional) 33.0 gpm (124.9 Lpm)
  • Hydraulic System Pressure 3,046 psi (21.0 MPa)
OPERATING PERFORMANCE
  • Hydraulic Reservoir Capacity 10.36 gal (39.0 L)
  • Hydraulic System Capacity 15.3 gal (58.0 L)
FLUID CAPACITIES
  • Engine Lubrication 11.2 qt (11.8 L)
  • Cooling System 14.8 qt (14.0 L)
  • Fuel Tank Capacity 19.8 gal (75.0 L)
  • Fuel Consumption (65% of Full Load) 2.69 gal/hr (10.2 L /hr)
MACHINE DIMENSIONS
  • Max. Lift Height to Bucket Pin 9 ft 11 in (3,030 mm)
  • Mid-Height Reach 4 ft 6.3 in (1,412 mm)
  • Overall Operating Height 12 ft 9.7 in (3,905 mm)
  • Dump Height Fully Raised 7 ft 9.0 in (2,370 mm)
  • Dump Reach Fully Raised 2 ft 4.7 in (730 mm)
  • Dump Angle 38.5°
  • Rollback Angle 30°
  • Track Ground Contact Length 4 ft 6.7 in (1,390 mm)
  • Machine Length 8 ft 11.8 in (2,740 mm)
  • Transport Length 11 ft 3.0 in (3,400 mm)
  • Transport Height 6 ft 11.9 in (2,130 mm)
  • Departure Angle 30°
  • Clearance Circle with Bucket 6 ft 10.0 in (2,080 mm)
  • Clearance Circle without Bucket 4 ft 6.0 in (1,375 mm)
  • Clearance Circle Rear 5 ft 2.4 in (1,585 mm)
  • Track Width 15.7 in (400 mm)
  • Ground Clearance 12.1 in (310 mm)
  • Overall Width without Bucket 5 ft 5.4 in (1,660 mm)
Takeuchi Fleet Management
  • 2 Year Standard Service
  • Minimize Downtime
  • Remote Diagnostics
  • Utilization Tracking
  • Proactive Maintenance
  • Control Costs

Request a Quote