
TL10V2 Compact Track Loader
The TL10V2 features a vertical lift loader arrangement and is Final Tier 4 emissions compliant. The cab is completely redesigned and enlarged and features a low-effort overhead door design for improved entry and egress. A quiet track design with wide block tread reduces vibration, noise levels, and improves ride quality.
Models: TL6R, TL8R2, TL12R2, TL12V2, Excavators, Wheel Loaders
TL10V2 FEATURES
ENGINE
- EPA Final Tier 4 Emission Compliant
- Turbocharged
- High Pressure Common Rail Injection System
- DOC+DPF Exhaust After Treatment
- Automatic Fuel Bleed System
- Active Power Control Power Management System
- Working Modes – Standard and ECO
- Dual Element Air Filter
- Dial and Foot Throttle
- High-Capacity Radiator and Hydraulic Oil Cooler Mounted Side-by-Side on Swing Out Frame
ELECTRICAL
- Sealed Rocker Switches
- 12 volt System with 60 amp Alternator
- LED Work Lights: Two Front and Two Rear
- Engine Preheat
- Hour Meter
- Back-up Alarm
- Horn
UNDERCARRIAGE & FRAME
- Double Reduction Planetary Drives
- Permanently Sealed Track Rollers with Metal Face Seals
- Fully Welded Frame with Integrated Cross Members
- Two Speed Travel
- 15.7″ Rubber Track
- Grease Type Track Adjuster
- Front and Rear Tie-Down Points and Lift Points
- Rear Bumper Integrated into Frame
OPERATOR’S STATION
- 5.7″ Color Multi-Informational Display with Rear Camera
- Tilt-up Operator’s Station
- Deluxe High Back Suspension Seat
- Rear Pivoting Lap Bar with Arm Rest
- ROPS / FOPS Structure
- Retractable 2″ Seat Belt
- Pressurized Cab with Roll-up Door, A/C, Heat, Defrost and Front Wiper, and AM / FM / MP3 Radio with NOAA Weatherband (optional)
- Retractable 3″ Seat Belt (optional)
- 3 Point Retractable Seat Belt (optional)
- Polycarbonate Door and Level 2 Guard (High Flow Only)
HYDRAULIC & WORKING EQUIPMENT
- Vertical Lift Design
- Pilot Hydraulic Controls
- Boom Float with Detent
- Cushioned Boom Cylinders
- Hydraulic Self Leveling
- Proportional Auxiliary Hydraulic Controls with Detent
- Pressure Relieving Flat Faced Coupler Body
- 14-Pin Connector with Push Button Control
- High Capacity Steel Hydraulic Tank
- Mechanical Quick Coupler
- Hydraulic Quick Coupler Cab – Standard Equipment
- Hydraulic Quick Coupler Canopy – optional
- Primary Flow Auxiliary Hydraulics 18.8 gpm
- High Flow Auxiliary Hydraulics 32.8 gpm (optional)
- Secondary Auxiliary Hydraulics 18.8 gpm (optional)
- Ride Control (optional)
- Pattern Change Valve (ISO or H) (optional)
SPECIFICATIONS AND DIMENSIONS
TL8R2 SPECS
OPERATING PERFORMANCE | ||
Operating Weight – Canopy | 9,950 lb | |
Operating Weight – Cab | 10,270 lb | |
Tipping Load | 7,205 lb | |
Rated Operating Capacity (ISO 14397-1)@35%* | 2,522 lb | |
Operating Load at 50% of Tipping Load | 3,600 lb | |
Bucket Breakout Force | 6,520 lb | |
Lift Arm Breakout Force | 5,400 lb | |
Traction Force | 9,730 lb | |
Ground Pressure – Canopy | 4.9 psi | |
Ground Pressure – Cab | 5.1 psi | |
Travel Speed – Low | 4.8 mph | |
Travel Speed – High | 7.0 mph | |
*Rated operating capacity of track loaders is rated according to SAE J818 at no more than 35% of the tipping load. | ||
HYDRAULIC SYSTEM | ||
Auxiliary Flow – Primary Circuit | 18.8 gpm | |
Auxiliary Flow – High Flow (optional) | 32.8 gpm | |
Hydraulic System Pressure | 3,481 psi | |
ENGINE | ||
Make / Model | Kubota / V3307CR-TE4B | |
Engine Displacement | 203 cu in | |
Horsepower @ 2,600 rpm | 74.3 hp | |
Maximum Torque @ 1,500 rpm | 195 ft-lb | |
FLUID CAPACITIES | ||
Engine Lubrication | 11.8 qt | |
Cooling System | 15.9 qt | |
Fuel Tank Capacity | 21.5 gal | |
Fuel Consumption (65% of Full Load) | 2.7 gal/hr | |
Hydraulic Reservoir Capacity | 9.5 gal | |
Hydraulic System Capacity | 17.2 gal |
10TLV2 DIMENSIONS
MACHINE DIMENSIONS | |
Max. Lift Height to Bucket Pin | 10 ft 4.8 in |
Dump Height Fully Raised | 7 ft 11.9 in |
Dump Reach Fully Raised | 3 ft 1.4 in |
Dump Angle | 40° |
Rollback Angle | 30° |
Track Ground Contact Length | 4 ft 7.9 in |
Machine Length | 9 ft 7.2 in |
Transport Length | 12 ft 1.0 in |
Transport Height | 7 ft 5.4 in |
Departure Angle | 30° |
Clearance Circle with Bucket | 7 ft 8.5 in |
Clearance Circle without Bucket | 5 ft 0 in |
Clearance Circle Rear | 5 ft 5.2 in |
Track Width | 15.7 in |
Ground Clearance | 12.6 in |
Overall Width without Bucket | 5 ft 8.5 in |
TAKEUCHI FLEET MANAGEMENT
- 2-Year Standard Service
- Minimize Downtime
- Remote Diagnostics
- Utilization Tracking
- Proactive Maintenance
- Control Costs
- Geofencing